欢迎进入北京龙盛门业有限公司网站
全国服务热线
13940183063
行业新闻
「唐山堆积门」快速卷帘门安装及开启方式的选
时间: 2019-07-05 09:27 浏览次数:
天津感应快速门,地下车库自动开启快速门,车牌识别收费堆积门「唐山堆积门」快速卷帘门安装及开启方式的选择




「唐山堆积门」快速卷帘门安装及开启方式的选择



 


自从快速卷帘门进入国内以来,许多商铺都选用此门,险些所有的大商场均可见到。


快速卷帘门外形雅观,容易清洗,主要是它本身通明,「天津硬质快速门」防爆PVC快速门品牌 ,可以很好的把商店的本质即商店是经营什么产品的,直接的告诉消费者。


进入商店以后,在水晶卷帘门的掩映下,有种置身水晶宫殿的感觉。


此门在霓虹灯的衬托下更显华丽高贵,莫名的给商品增加了无限的修饰。


底下小编为大家介绍一下快速卷帘门不同的安装环境适用用哪些智能开启方式。
 

 

张家口地下车库快速门




按照程度支配区分为:


边装,即卷帘两头导轨设备于建筑洞口外侧,「张家口快速门」互锁式堆积门调试注意事项 ,也就是说设备好后的门洞有用净宽是原门洞的宽度,常见于墙体开门装卷帘的。


中装,即卷帘两头导轨设备于建筑洞口内侧,也就是说设备好后的门洞有用净宽是原门洞减去两导轨的宽度(200*2),常见于两条建筑立柱间的设备。


边中装,即卷帘两头导轨一边设备于建筑洞口内侧,另一边设备于建筑洞口外侧,也就是说设备好后的门洞有用净宽是原门洞减去一条导轨的宽度(200*1),常见于犯警则建筑立柱或洞口间的设备。


按照笔直或高低区分为:


梁上:即卷帘上卷后的门头吊挂于原建筑门洞的上方,凡是门头的高度为400mm。


梁下:即卷帘上卷后的门头吊挂于原建筑门洞的下方,凡是门头的高度为400mm,实习有用净高是原建筑洞口的高度减去门洞的高度(这一点出格留心)。


查看现场:


查看要设备卷帘门现场建筑构造,按照实习环境作出卷帘种类选择,需要便于安稳设备两头机头板及导轨。


对于双轨双帘的设备,要考虑每一端两导轨设备厚度必需达400mm,主机关板的厚度为900mm。


对于有水电气等管桥线架必需穿越卷帘门洞的,能常做法是将管桥线架设备于门洞宽的一侧,齐管边用砖石砌封减小门洞后再测量;或将管桥线架顶门洞顶设备,降低门头设备方位及降低门洞有用净高,后用防火卷帘质料进行封堵,有用否决火势的漫延。


对于判定规划好设备两头机头板及导轨方位后开端用卷尺测量门洞,宽=两头导轨背部间的距离,高=地上至机头板顶的距离。


若为中装需加装封堵,宽=卷帘宽,高=建筑顶部至导轨顶部距离+50mm。


对于犯警则的建筑洞口,要充沛考虑安稳设备两头机头板及导轨(或双导轨)设备方位后,借用砖石、角钢、H钢等质料进行加固或支撑,对于宽度或高度有阻隔的只需减小设备宽度或高度再借助于砖石或防火质料进行封堵。

 


北京地下车库快速门批发

 


Selection of Installation and Opening Method of Quick Rolling Curtain Door of Tangshan Accumulation Door



Since the rapid curtain door entered the country, many shops have chosen this door, almost all the shopping malls can be seen.



Fast curtain door is elegant in appearance and easy to clean, mainly because it is clear in itself. The brand of "Tianjin Hard Fast Gate" explosion-proof PVC Fast Gate can tell consumers directly the essence of the store, that is, what products the store operates.



After entering the shop, under the cover of the crystal curtain door, there is a feeling of being in the crystal palace.



This door is even more magnificent and noble against the background of neon lights, which inexplicably adds infinite decoration to the goods.



The following is a brief introduction to the different installation environments of fast rolling shutter doors, which intelligent opening methods are suitable for you.



According to the degree of domination, it can be divided into:



Side mounting, that is, the two ends of the rolling curtain guide rail equipment on the outside of the building entrance, "Zhangjiakou Express Door" interlocking stacking door debugging notes, that is to say, after the equipment is good, the useful net width of the door is the width of the original door, commonly used in the wall open door with rolling curtain.



Medium-sized equipment, that is, the rolling curtain two-end guide rail equipment in the inside of the building entrance, that is to say, the useful net width of the door after the equipment is good is the original door hole minus the width of the two guideways (200*2), which is common in the equipment between the two building pillars.



Side-to-middle installation, that is, the guide rail at both ends of the curtain is equipped on the inside of the building entrance, and the other side is equipped on the outside of the building entrance. That is to say, the useful net width of the door after the equipment is good is the width of the original door hole minus the width of a guide rail (200*1), which is commonly used in the equipment between the building pillars or the entrance of the building in violation of the police rules.



According to the straight or the high or low, it can be divided into:



Beam: That is to say, the door head after rolling up the curtain is hanging above the original building door, and the height of the door head is 400 mm.



Under the beam: that is, the door head of the curtain rolled up hangs below the original building entrance, where the height of the door head is 400 mm, the useful net height of the practice is the height of the original building entrance minus the height of the entrance (this is particularly careful).



View the scene:



Looking at the construction of the rolling shutter doors on site and choosing the types of rolling shutters according to the practice environment, it is necessary to stabilize the head plates and guide rails at both ends of the equipment.



For double-track and double-curtain equipment, it is necessary to consider that the thickness of the equipment of two guideways at each end must be up to 400 mm, and the thickness of the closing plate of the main engine should be 900 mm.



For pipeline bridges with water, electricity, etc., which have to pass through curtain door openings, it is common practice to place the equipment on the wide side of the door openings, seal the door openings with bricks and stones at the side of the pipes, and then measure them; or to put the equipment on the top of the pipe bridges to reduce the orientation of the door head equipment and the useful net height of the door openings, and then seal them with fire-proof curtain material. Blockage, useful to veto the spread of fire.



For determining and planning the orientation of the head plate and guide rail of the two ends of the equipment, the opening of the door is measured with tape measure. The width is equal to the distance between the back of the two ends of the guide rail, and the height is equal to the distance from the ground to the top of the head plate.



If plugging is needed for middle installation, width = curtain width, height = distance from top of building to top of guide rail + 50mm.



For the building openings that violate the police rules, we should take full account of the orientation of the head plates and guideways (or double guideways) of the stabilizing equipment, and use masonry, angle steel, H steel and other materials to reinforce or support them. For those whose width or height is obstructed, we only need to reduce the width or height of the equipment, and then use masonry or fire-proof materials to block them.



「唐山堆积门」快速卷帘门安装及开启方式的选择



 

Copyright © 北京龙盛门业有限公司 版权所有 辽ICP备:备案中···
全国服务电话:13940183063   售后服务:024-31081023
公司地址:北京市怀柔区宝山镇

百度地图 - 网站地图