欢迎进入北京龙盛门业有限公司网站
全国服务热线
13940183063
行业新闻
「张家口快速门」堆积门有卡顿或反弹的原因
时间: 2019-07-01 13:24 浏览次数:
快速门关闭的时候反向运行(反弹)1.如果门安装了雷达,请确认门在运行的时候的震动没有引起雷达的动作2.如果门「张家口快速门」堆积门有卡顿或反弹的原因



「张家口快速门」堆积门有卡顿或反弹的原因


Reasons for Carton or rebound of "Zhangjiakou Express Gate" stacking doors


 


快速门关闭的时候反向运行(反弹)

Reverse running (rebound) when the shutter closes


1. 如果门安装了雷达,请确认门在运行的时候的震动没有引起雷达的动作


1. If the door is equipped with radar, make sure that the vibration of the door during operation does not cause radar action.


沧州快速堆积门维修


2. 如果门安装了遥控器控制,请确认遥控接收器没有被其余的未知信号干扰而动作,如果有这种情况,需要重新给接收器写码


2. If the door is equipped with remote control, make sure that the remote control receiver is not disturbed by other unknown signals. If this is the case, the receiver needs to be re-coded.


3. 确认底部保护光电发射器和接收器在一条线上而且安装牢靠


3. Verify that the bottom protects the photoelectric transmitter and receiver on one line and is firmly mounted.


4.确认底部保护光电的探测灵敏度是调整正确的


4. Confirm that the sensitivity of bottom protection photoelectric detection is correctly adjusted.


5. 确认在门关闭的时候没有任何物体可以碰到无线底部防夹装置(底边)


5. Make sure that no object can touch the wireless bottom anti-clip device (bottom) when the door closes.


6. 确认门帘底边的无线安全防夹装置功能正常


6. Verify that the wireless safety clamp-proof device at the bottom of the door curtain is functioning properly.


7. 确认门帘底边的无线安全防夹装置内的接线是正确的且没有松动


7. Verify that the wiring in the wireless safety clamp device at the bottom of the door curtain is correct and not loosened.


8. 确认缠绕传感器在门关闭的时候没有被激活(仅9210 和 9200 适合).


8. Verify that the winding sensor is not activated when the door closes (only 9210 and 9200 are suitable).


9. 检查系统的错误代码,「邢台快速门」,根据错误代码表来判断问题的所在


9. Check the error code of the system, "Xingtai Express Gate", and judge the problem according to the error code table.


快速门在运行的时候有卡阻(不顺滑)


Fast doors are stuck in operation (not smooth)


1. 检查客户输入电源的电压以及控制箱内保护开关输出端的电源电压


1. Check the input voltage of the customer and the output voltage of the protection switch in the control box.


2. 确认电机电缆的接线是按要求接好的


2. Confirm that the connection of motor cable is as required.


丹东厂房堆积门
 


3. 确认门帘没有由于门柱之间的距离过大绷的过紧而受到卡阻


3. Make sure that the curtain is not blocked because the distance between the doorposts is too large and too tight.


4. 确认门体在已经按照要求进行了充分的润滑


4. Verify that the door body has been fully lubricated as required.


5. 检查系统的错误代码,「沧州快速门」,根据错误代码表来判断问题的所在


5. Check the error code of the system, "Cangzhou Express Gate", and judge the problem according to the error code table.


6. 确保没有其余问题影响门的运行,「沧州快速门」


6. Ensure that there are no other problems affecting the operation of the door, "Cangzhou Express Gate".

Copyright © 北京龙盛门业有限公司 版权所有 辽ICP备:备案中···
全国服务电话:13940183063   售后服务:024-31081023
公司地址:北京市怀柔区宝山镇

百度地图 - 网站地图